If you’re enabling CORS on your ASP.NET web service, you’ll be receiving an ‘Origin’ header and outputting an Access-Control-Allow-Origin header if you’re happy to receive the request. If you’re being strict about your access control policy, you’ll be returning the same origin you got rather than * so that the user agent knows to let the call continue.
This poses a bit of an obstacle when combined with ASP.NET Output Caching, as unless you either tell it to vary its output by all headers or explicitly call out the Origin header you may find that accessing your service from two URLs within your cache lifetime period will see one call succeed and the other fail.
The failing call is because the Access-Control-Allow-Origin header’s being sent from the cache, but for the broken site won’t match the Origin that was sent to it and since we’ve not configured output caching to vary by the Origin header it assumes the requests from the two different origins are the same and responds accordingly.So, we just need to tack in the Origin header into our cache configuration’s varyByHeader attribute (separated from other headers with a semicolon, if any others exist) and bingo! The two sites result in correct responses.
Mauricio Diaz Orlich made a LinqPad storage driver that lets you query Azure Table Storage as easily as any other data-source within LinqPad – this is invaluable when working with Azure as there aren’t any real alternatives when you just want to make an ad-hoc query or make multi-table queries.
However, there’s an issue – the driver doesn’t use continuation tokens internally so your query needs to both finish executing within the Azure Table Storage limit of 5 seconds and return fewer than 1000 results, otherwise you’ll be missing data and won’t necessarily notice.
I forked the source to see if I could patch in a way around it but in doing so found a much simpler solution – do exactly what you’d do in your .NET code and call the AsTableServiceQuery() extension method on your query before you materialise it.
.Where(x => x.EmailAddress == "firstname.lastname@example.org")
This query will now return as many results as exist (up to LinqPad’s seemingly unavoidable 10,000 record limit) and will execute for as long as it takes to actually return all results by way of continuation tokens.
Had this recently while deploying to Azure, to the blank staging slot of a cloud service that already had a production instance running.
Looking at the log, immediately before the error Visual Studio claimed that it was stopping a role – how can that be, when the staging slot’s already free? This is another situation where you shouldn’t believe Visual Studio’s lies – upload the package directly to the portal in the event of failure and you’ll generally get better and more accurate errors.
The issue in this case? We’d run out of spare cores in our subscription to deploy two medium instances of the application to staging. Why does the error talk about missing deployments (and try to stop non-existent deployments in this instance)? Unknown.
The Whisky Fringe Tasting Tracker will be running again this year, hopefully much better on some mobile devices where it was sluggish and tricky to use last year.
And to celebrate, it’s moving from its old location to http://dramtracker.com. Your old user accounts should continue to work, and all your old tasting scores and notes are still accessible – just pull down the ‘year’ list and choose 2012 to see your scores from last year.
The set of whiskies is still identical to last year for testing purposes until the full programme is released. Sláinte!
Json.NET is brilliant, not least because it produces much more sensible JSON in a number of situations than the DataContractJsonSerializer but also because there aren’t many problems that can’t be solved by adding appropriate attributes or formatters.
Sometimes you need to output specific names for enumeration members – in most cases the enumeration member name itself, and Json.NET comes with the StringEnumConverter for this purpose and it works well – just decorate the enumeration itself with the JsonConverter attribute and you’re done.
In some cases though you need to output values that wouldn’t otherwise be valid C# identifiers – for example, the string ‘A128CBC-HS256’ for an enumeration member ‘A128CBC_HS256’ (where we want that underscore turned into a dash). Adding DataMember attributes to the enumeration members doesn’t work, so I threw the following together quickly to respect them where present.
Presented as-is and without much testing – in particular there’ll be a performance hit for this as we’re using reflection to render and parse the values.
public enum EncryptionMethod
[DataMember(Name = "A128CBC-HS256")]
[DataMember(Name = "A256CBC-HS512")]
I’ve got a few modest goals for this year’s Whisky Fringe Tasting Tracker that almost all stem from lessons learned last year and feedback received.
Reducing busyness of the UI
The Tasting Tracker is a single, long list of all of the drams available for sampling – tapping a dram line-item expands out your tasting notes and scoring information for the dram. Finding your dram in the list can be tricky, though, as we show both dram name and distillery/bottler with the same level of UI precedence).
The old dram list (left) showed distillery name at the same scale as the dram name
This has been changed so that the distillery name is a small, grey subtitle under the dram name making the dram names stand out much more and lightening the UI.
Page size and rendering speed
Expanding the scoring and note controls is a slow operation for a number of reasons:
- We’re generating HTML for editing controls for each of the 250+ drams to be sampled, even though you’ll only ever see one at a time
- Tapping expands out the section, causing a reflow of the document – slow anyway, but even slower on mobile devices
- The sheer volume of HTML being sent to the device makes the DOM very large, slow to manipulate and style
To improve this, I’ve moved the expanding scoring section to instead be a modal popup:
Scoring and tasting notes now appear as a modal dialog, reducing the amount of reflow and simplifying the DOM
Not only does it let us show the scoring and note sections without being quite so cramped, it also means that the editing controls are only output in the markup once, simplifying the DOM and the volume of HTML sent to the browser. In fact – just this reduces the volume of markup on the main dram-list for logged in users to just 35% of what it was before.
- Before: 386KB, 19.7KB compressed
- After: 134KB, 12.2KB compressed (34.7% of previous uncompressed volume)
While this has negligible impact on the actual number of bytes sent to the device (as compression is employed), it has a noticeable on-device impact in terms of responsiveness which I hope to quantify shortly.
There’re a few big-ticket items left on my list:
- Simplifying account creation and sign-in
- Supporting some manner of offline mode + sync in case data drops-out during the event
- Introducing live sampling heatmaps
There’s also more work to be done on making the site much quicker to navigate and manipulate – hopefully making it as quick to use as pen-and-paper.
I recently had a deployment issue where a push of new code caused a worker role to continually restart – everything worked locally, but the thing just wouldn’t stay up in the cloud.
A cleaner event log for diagnosing role-start issues
The ability to remote into an instance is invaluable for diagnosing this sort of thing, especially when your instance is falling down before it even runs your start-up code. In my instance, the Application event log was filling up with error entries at a rate of 4 a second, all tied back to the Windows Azure Caching Client installer. That didn’t make any sense – the thing hadn’t changed for months. With so many log entries it was hard to tell what was happening.
However, the Windows Azure event log under Applications and Services Logs was much more helpful. It seemed that the role was restarting due to a version conflict of the New Relic monitoring agent – nothing to do with the Caching Client installer. Perhaps the caching client installer was being kicked off by the role starting, and so by terminating it was killing the child process leading to normal Application log entries?
Regardless – it set me down the right path of fixing the dodgy reference and redeploying – making the instance stable at the same time.
I recently wanted to install the Windows Azure SDK 2.0 on my development laptop, but the usually-pretty-good Web Platform Installer was having none of it:
Well… that’s unhelpful
Luckily WPI gives us a log file during installation that might help. Taking a quick shufty, we find where the problem is pretty quickly:
DownloadManager Information: 0 : Starting EXE command for product 'Windows Azure Emulator - 2.0'. Commandline is: '[removed for brevity]\WindowsAzureEmulator-x64.exe /quiet /norestart /msicl RUNDSINIT=1 /log C:\Users\<Username>\AppData\Local\Temp;C:\Qt\Qt5.0.2\5.0.2\msvc2012_64\bin\WindowsAzureEmulator_2_0.txt'. Process Id: 5264
DownloadManager Information: 0 : Install exit code for product 'Windows Azure Emulator - 2.0' is '1622'
So – the process is exiting with code 1622, but hold on – what the hell’s that log path? It starts looking like a reference to the temp directory, but with the Qt install path involved? Let’s look at what %TEMP%’s set to:
As they say – there’s your problem. Removing Qt from the %TEMP% environment variable and we’re off.
While I’m not sure if I’m going to re-run the Whisky Fringe Tasting Tracker from last year, I saw heatmap.js for the first time the other day and thought it’d be fun to make a Mansfield Traquair heatmap showing dram-sampling by stand. Here’s the result:
The 675 samplings recorded by www.wf2012.co.uk over the 2012 Whisky Fringe
Not bad for a first attempt. That’s 675 samplings tracked by stand – of course, some stands had appreciably more drams to sample than others but there were definite hotspots. Given that we have opinion data too, we can also plot the hotspots of most-liked drams:
Positive opinions recorded at each stand during the 2012 Whisky Fringe – broadly similar but with some interesting detail
If I do run it again this year it’d be great to get heatmap.js combined with the above floorplan image and Pusher for some real-time updates…
Sometimes you come across relatively simple operations that work locally but fail in the cloud – notably, anything that involves image manipulation using the System.Drawing namespace is unlikely to work.
When faced with this sort of thing, WPF immediately springs to mind and luckily this post from Dr WPF gives a sample that works both locally and in the cloud – jackpot!